Friction and Wear Resistance for Polyetheretherketone Filled with Different Filler Materials: A Comparative Study

https://doi.org/10.24017/science.2017.3.55

Abstract views: 1053 / PDF downloads: 794

Authors

  • Dalia M.T. Mustafa Dept of Production Eng & Metallurgy, College of Engineering, Sulaimani Polytechnic University, Sulaimani, Kurdistan- Iraq
  • Sarkawt Rostam Dept of Production Eng & Metallurgy, College of Engineering, Sulaimani Polytechnic University, Sulaimani, Kurdistan- Iraq

Abstract

Friction and wear behavior of Polyetheretherketone (PEEK) filled with different filler composites were compared. The comparisons were made for different scholar research works which were published between 1987 – 2017.The comparison took place between different filler composites such as carbon fiber (CF) reinforced Polyetheretherketone, nanometer Al2O3, nanometer SiC, polytetrafluoroethylene (PTFE) filled PEEK, nanometer ZrO2, nanometer SiO2, nanometer Si3N4, CuS,  short fiber reinforced PEEK composites, PEEK-CF30, GO-Si and Graphite composites.The friction and wear were studied according to different factors of the filler composites  such as plasma treated PEEK, volume percentage, weight percentage, sliding distance, surface of roughness, and size of particles.By this work we can understand the effect of some nanometer particles which act as fillers in polyetheretherketone, and by this comparison study we conclude that friction and wear properties can be decreased or increased or stay unchanged by increasing and decreasing the amount of fillers but it can be improved by adding different fillers with certain properties to obtain optimal results.

Keywords:

Polyetheretherketone, friction, wear, filler composites.

References

[1] K. Tanaka, "Effects of various fillers on the friction and wear of PTFE- based composites", in Friction and Wear of Polymer Composites, K. Friedrich (Ed.), Elsevier, pp. 137- 174, 1986.
https://doi.org/10.1016/B978-0-444-42524-9.50009-0
[2] R. L. Fusaro, H. E. Sliney, "Friction and wear behavior of graphite fiber reinforced polyimide composites", ASLE Transactions, 21(4), pp. 1-14, 1978.
https://doi.org/10.1080/05698197808982893
[3] Q. H. Wang, J. Xu, W. Shen, Q. Xue, "The effect of nanometer SiC filler on the tribological behavior of PEEK", Wear, 209 (1-2), pp. 316-321, 1997.
https://doi.org/10.1016/S0043-1648(97)00015-X
[4] T. Okabe, N. Takeda, "Size effect on tensile strength of unidirectional CFRP composites-experiment and simulation", Composites Science and Technology, 62 (15), pp. 2053-2064, 2002.
https://doi.org/10.1016/S0266-3538(02)00146-X
[5] M. Sumer, H. Unal, A. Mimaroglu, "Evaluation of tribological behavior of PEEK and glass fiber reinforced PEEK composite under dry sliding and water lubricated conditions", Wear, 265 (7-8), pp. 1061-1065, 2008.
https://doi.org/10.1016/j.wear.2008.02.008
[6] J. P. Davim, N. Marques, A. M. Baptista, "Effect of carbon fiber reinforcement in the frictional behavior of PEEK in a water lubricated environment", Wear, 251 (1-12), pp. 1100- 1104, 2001.
https://doi.org/10.1016/S0043-1648(01)00741-4
[7] R. Prehn, F. Haupert, K. Friedrich, "Sliding wear performance of polymer composites under abrasive and water lubricated conditions for pump applications", Wear, 259 (1-6), pp. 693- 696, 2005.
https://doi.org/10.1016/j.wear.2005.02.054
[8] X. Liujie, J. P. Davim, R. Cardoso, "Prediction on tribological behavior of composite PEEK-CF30 using an artificial neural networks", Journal of Materials Processing Technology, 189 (1-3), pp. 374-378, 2007.
https://doi.org/10.1016/j.jmatprotec.2007.02.019
[9] J. P. Davim, R. Cardoso, "Effect of the reinforcement (carbon or glass fiber) on friction and wear behavior of the PEEK against steel surface at long dry sliding", Wear, 266 (7-8), pp. 795-799, 2009.
https://doi.org/10.1016/j.wear.2008.11.003
[10] J. P. Davim, R. Cardoso, "Tribological behavior of the composite PEEK-CF30 when dry sliding against steel using statistical techniques", Materials & Design, 27 (4), pp. 338- 342, 2006.
https://doi.org/10.1016/j.matdes.2004.11.006
[11] J. P. Davim, N. Marques, "Evaluation of tribological properties of polymeric materials for hip prosthesis applications", Tribology Letters, 11(2), pp. 91-94, 2001.
https://doi.org/10.1023/A:1016607400392
[12] H. Voss, K. Friedrich, "On the wear behavior of short-fiber-reinforced PEEK composites", Wear, 116(1), pp. 1-18, 1987.
https://doi.org/10.1016/0043-1648(87)90262-6
[13] N. Marques, J. P. Davim, "Tribological comparative study of conventional and composite materials for biomedical applications", Key Engineering Materials, 230-232, pp. 487-490, 2002.
https://doi.org/10.4028/www.scientific.net/KEM.230-232.487
[14] Z. Wang, D. Gao, "Friction and wear properties of stainless steel sliding against polyetheretherketone and carbon-fiber-reinforced polyetheretherketone under natural seawater lubrication", Materials & Design, 53, pp. 881-887, 2014.
https://doi.org/10.1016/j.matdes.2013.07.096
[15] H. B. Qiao, Q. Guo, A. G. Tian, G. L. Pan, L. B. Xu, "A study on friction and wear characteristics of nanometer Al2O3/PEEK composites under the dry sliding condition", Tribology International, 40 (1), pp. 105- 110, 2007.
https://doi.org/10.1016/j.triboint.2006.02.069
[16] Q. Wang, Q. Xue, H. Liu, W. Shen, J. Xu, "The effect of particle size of nanometer ZrO2 on the tribological behavior of PEEK", Wear, 198 (1-2), pp. 216-219, 1996.
https://doi.org/10.1016/0043-1648(96)07201-8
[17] Q. H. Wang, J. Xu, W. Shen, Q. Xue, "The effect of nanometer SiC filler on the tribological behavior of PEEK", Wear, 209 (1-2), pp. 316- 321, 1997.
https://doi.org/10.1016/S0043-1648(97)00015-X
[18] J. V. Voort, S. Bahadur, "The growth and bonding of transfer film and the role of CuS and PTFE in the tribological behavior of PEEK", Wear, 181- 183(1), pp. 221- 221, 1995.
https://doi.org/10.1016/0043-1648(94)07021-0
[19] Q. H. Wang, J. Xu, W. Shen, W. Liu, "An investigation of the friction and wear properties of nanometer Si3N4 filled PEEK", Wear, 196 (1-2), pp. 82-86, 1996.
https://doi.org/10.1016/0043-1648(95)06866-X
[20] H. J. Song, N. Li, Y. Li, C. Min, Z. Wang, "Preparation and tribological properties of graphene/ poly (ether ether ketone) nano composites", Journal of Materials Science, 47 (17), pp. 6436- 6443, 2012.
https://doi.org/10.1007/s10853-012-6574-0
[21] T. Sinmazcelik, T. Yilmaz, "Thermal aging effects on mechanical and tribological performance of PEEK and short fiber reinforced PEEK composites", Materials & Design, 28 (2), pp. 641- 648, 2007.
https://doi.org/10.1016/j.matdes.2005.07.007
[22] Y. S. Shang, Y. Zhao, Y. Liu, Y. Zhu, Z. Jiang, H. Zhang, "The effect of micron-graphite particle size on the mechanical and tribological properties of PEEK composites", High Performance Polymers, doi.org/10.1177/0954008316685410, 2017.
https://doi.org/10.1177/0954008316685410

Downloads

How to Cite

[1]
D. M. Mustafa and S. Rostam, “Friction and Wear Resistance for Polyetheretherketone Filled with Different Filler Materials: A Comparative Study”, KJAR, vol. 2, no. 3, pp. 335–340, Aug. 2017, doi: 10.24017/science.2017.3.55.

Article Metrics

Published

27-08-2017