Corrosion Behavior of Recycling Al- Alloy Based Metal Matrix Composites Reinforced by Nano particles

https://doi.org/10.24017/science.2017.3.49

Abstract views: 1053 / PDF downloads: 912

Authors

  • Niveen Jamal Abdulkader Materials Engineering University of Technology, Baghdad, Iraq
  • Nibras Saeed Jasim Materials Engineering University of Technology, Baghdad, Iraq
  • Fadhil Abbas Hashim Materials Engineering University of Technology Baghdad, Iraq

Abstract

The present work aims to preparation and investigation of the corrosion behavior of  recycling Al alloy based metal matrix composite reinforced with nano SiC with weight percentage (2%, 4%, 6%, and 8%) and particle size 52 nm were evaluated. The composites were fabricated using liquid metallurgy (stir casting process). The corrosion rates of composites were calculated using potentiostatic  measurements in 3.5% NaCl solution.. The results showed that Al/SiC nanocomposites have higher corrosion resistance than aluminum matrix.The corrosion resistance was found to be increased by increasing of the weight percentage of the nanoparticles The Al/8% nano (SiC)P composites exhibited the highest corrosion resistance among all the investigated nanocomposites. The microstructure  indicate that the strong interfacial bonding between the matrix alloy and reinforcement.

Keywords:

Recycling Al, Nano SiC Particles, Metal Matrix Composite, Stir casting, Corrosion Resistance & Potentiostatic Measurements.

References

[1] C. N. Chawla, "Metal-matrix composites in ground transportation". JOM, 58, 67-70, 2006.
https://doi.org/10.1007/s11837-006-0231-5
[2] A.i, H. Saebnouri, E.; Sadrnezhaad, S.K.; Ghanbari, M.; Shahrabi, T. "Processing and surface properties of Al-AlN composites produced from nanostructured milled powders." J. Alloy. Compd., 490, 624-630,2010.
https://doi.org/10.1016/j.jallcom.2009.10.121
[3] Z. Zhang.; D.L. Chen, "Contribution of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites.", Mat. Sci. Eng. A, 483-484, 148-152, 2008.
https://doi.org/10.1016/j.msea.2006.10.184
[4] Z. Zhang.; D.L. Chen, "Consideration of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites": A model for predicting their yield strength. Scripta Mater., 54, 1321-1326, 2006.
https://doi.org/10.1016/j.scriptamat.2005.12.017
[5] P. Luo, M. Donald, D.T.; W. Xu,; Palanisamy, S.; Dargusch, M.S.; Xia. K. "A modified Hall-Petch relationship in ultrafine-grained titanium recycled from chips by equal channel angular pressing",. Scripta Mater., 66, 785-788, 2012.
https://doi.org/10.1016/j.scriptamat.2012.02.008
[6].P. C. R Nunes and L. V. Ramanathan, "Corrosion Behaviour of Alumina-Aluminum and Silicon Carbide-Aluminum Metal Matrix Composites", Corrosion Science, Vol. 51, No. 8, pp. 610-617, 1995.
https://doi.org/10.5006/1.3293621
[7] M. Singla, D. Deepak D., L. Singh, Vikas Chawla, "Development of Aluminium Based Silicon Carbide Particulate Metal Matrix Composite", Journal of Minerals & Materials Characterization & Engineering, Vol. 8, No.6, pp.455-467, 2009.
https://doi.org/10.4236/jmmce.2009.86040
[8] G. M. Pinto, J. h Nayak, A N. Shetty, "Corrosion Behaviour of 6061 Al - 15vol. Pct. SiC Composite and its Base Alloy in a Mixture of 1:1 Hydrochloric and Sulphuric Acid Medium", J. Electrochem. Sci., 4 , pp. 1452 - 1468, 2009.
[9] H. M. Zakaria, "Microstructural and corrosion behavior of Al/SiC metal matrix composites", Ain Shams Engineering Journal, Volume 5, Issue 3, September 2014, p.p 831-838
https://doi.org/10.1016/j.asej.2014.03.003
[10] B.Babu,S.K.Karthikeyan,V.Adithya,"Experimental Investigation and Analysis of Corrosion and Hardness using Aluminium Composites", International Journal of Latest Trends in Engineering and Technology, (IJLTET), ISSN: 2278-621X, Vol. 4 Issue 4 November 2014.
[11] K. K. Alaneme, A. F. Babajide, A. J. Omotoyinbo, Joseph O. Borode, M. O. Bodunrin, "Corrosion and wear behavior of stir-cast aluminium-based hybrid composites reinforced with silicon carbide and corn cob ash", African Corrosion Journal, Official publication of the Corrosion Institute of Southern Africa, Vol.1, No.2, 2015.
[12] M. K. Aravindan & K. Balamurugan, "Tribology And Corrosion Behavior Of AL 6063/SiC Metal Matrix Composits", International Journal of Advanced Engineering Technology, E-ISSN 0976-3945, Vol. VII/Issue II/April-June, 2016.
[13] P.R. Roberge, "Corrosion Engineering: Principles and Practice", New York: McGraw-Hill., 2008.
[14] P.S. S. R. Kumar, D.S. Robinson Smart, S. J.Alexis, "Corrosion behaviour of Aluminium Metal Matrix reinforced with Multi-wall Carbon Nanotube", Journal of Asian Ceramic Societies 5 (2017).
https://doi.org/10.1016/j.jascer.2017.01.004

Downloads

How to Cite

[1]
N. J. Abdulkader, N. S. Jasim, and F. A. Hashim, “Corrosion Behavior of Recycling Al- Alloy Based Metal Matrix Composites Reinforced by Nano particles”, KJAR, vol. 2, no. 3, pp. 279–283, Aug. 2017, doi: 10.24017/science.2017.3.49.

Article Metrics

Published

27-08-2017