Mechanical Behavior of A MEMS Based Capacitive Energy Harvester

https://doi.org/10.24017/science.2017.3.6

Abstract views: 1028 / PDF downloads: 923

Authors

  • Soleyman Azizi Mechanical Engineering Department, Engineering Faculty, Urmia University, Urmia, Iran
  • Mohammad Rahimpour Industrial Engineering Department, Engineering Faculty, Kharazmi University, Tehran, Iran
  • Loghman Ghaderi Rad School of Mechanical Engineering, College of Engineering, University of Tehran, Tehran, Iran

Abstract

Energy harvesting is defined as a technology that converts the available excess energy in the environment into usable energy for low power consuming electronics. Past researches on vibration energy harvesting has focused mainly on the use of magnets or piezoelectric materials as the basis of energy transduction. This paper presents a new design for extracting energy using an electrostatic capacitive energy harvester which can be considered as a combination of charge constrained and voltage constrain cycles. In previous analyses, the constant charge and constant voltage operation were studied separately, but in this work both of these operations have been studied in a combination with each other. In this paper, the variable capacitor is formed by an out of plane gap closing structure. In order to investigate the mechanical behaviour of the capacitive energy harvester, a rectangular micro plate is considered with geometrical and material properties. Due to the nonlinearity and low displacement amplitude that result from electrostatic force, energy can be generated. In order to study the primer factors for increasing generated energy, geometrical parameters of the system have been changed. Time history of the shuttle mass and micro-plate undergone vibration are illustrated. It must be noted that after several cycle vibration of the plate, it reaches to stability and regular cycles.

Keywords:

Energy harvesting; Capacitive; electrostatic; constant charge; Constant voltage.

References

[1] S. Beeby, N. White, Energy Harvesting for Autonomous Systems (Smart Materials, Structures, and System), Artech House, 2010
[2] E. Blokhina, D. Galayko, P. Basset, O. Feely, "Steady-State Oscillations in Resonant Electrostatic Vibration Energy Harvesters," IEEE Transactions on Circuits and Systems I, 60 (4), pp. 875-884, 2013.
https://doi.org/10.1109/TCSI.2012.2209295
[3] S. Boisseau, G. Despesse, B. Ahmed Seddik, "Electrostatic Conversion for Vibration Energy Harvesting," Small-Scale Energy Harvesting, pp. 1-39, 2012.
https://doi.org/10.5772/51360
[4] F. Khatami, G. Rezazadeh, "Dynamic response of a torsional micro mirror to electrostatic force and mechanical shock," Microsystem Technologies, 15, pp. 535-545, 2009.
https://doi.org/10.1007/s00542-008-0738-5
[5] C. Lee, Y. Lim, B. Yang, R. Kotlanka, C. Heng, J. He, M. Tang, J. Xie, H. Feng, "Theoretical comparison of the energy harvesting capability among various Electrostatic mechanisms from structure aspect," Sensors and Actuators, 156, pp. 208-216, 2009.
https://doi.org/10.1016/j.sna.2009.02.024
[6] S. Meninger, J. Mur-Miranda, R. Amirtharajah, A. Chandrasakan, J. Lang, "Vibration to electric energy conversion," IEEE Trans. 9(1), pp. 64-76, 2001.
https://doi.org/10.1109/92.920820
[7] P. Miao, P. Mitcheson, D. Holmes, E. Yeatman, T. Green, B. Stark, "Mems inertial power generators for biomedical applications," Microsystem Technologies. 12(10), 1079-1083, 2006.
https://doi.org/10.1007/s00542-006-0152-9
[8] P. Michelson, E. Yeoman, G. Rao, A. Holmes, T. Green, "Energy harvesting from human and machine motion for wireless electronic devices," Proceedings of the IEEE, 96, 1457-1486, 2008.
https://doi.org/10.1109/JPROC.2008.927494
[9] S. Roundy, P. Wright, K. Pister, "Micro-electrostatic vibration-to-electricity converters," In ASME International Mechanical Engineering Congress and Exposition, pp. 487-496, 2002.
https://doi.org/10.1115/IMECE2002-39309
[10] C. Williams, R. Yates, "Analysis of a Micro-Electric Generator for Micro Systems," Proceedings of the Transducers 95/Euro sensors IX, pp.341-344 1995.
[11] C. Williams, R. Yates, "Analysis of a micro-electric generator for micro systems," Sens Actuatorsm 52, pp. 8-11, 1996.
https://doi.org/10.1016/0924-4247(96)80118-X

Downloads

How to Cite

[1]
S. Azizi, M. Rahimpour, and L. G. Rad, “Mechanical Behavior of A MEMS Based Capacitive Energy Harvester”, KJAR, vol. 2, no. 3, pp. 186–192, Aug. 2017, doi: 10.24017/science.2017.3.6.

Article Metrics

Published

27-08-2017