Fresh and Mechanical Characteristics of Eco-efficient GPC Incorporating Nano-silica: An Overview
https://doi.org/10.24017/science.2021.2.6
Abstract views: 1744 / PDF downloads: 926Abstract
Nanotechnology can be regarded as one of the most active studies regions with both novel technological know-how and useful packages which have gradually received attention, especially over the past two many years. The nanotechnology development offers new performance to the materials. Recently efforts have been made to incorporate nanoparticles in construction materials to enhance properties and produce concrete with improved performance. progress in the improvement of geopolymer concrete is fast becoming a feasible alternative to conventional cement-based totally concrete because geopolymer concrete is measured as an eco-efficient green concrete that consumes a large quantity of commercial and agro byproduct substances consisting of fly ash, floor granulated blast furnace slag, rice husk ash. To improve the overall performance of geopolymer concrete several methods have been investigated including using nanomaterials to enhance the chemical reactivity of the geopolymer concrete mixture and provide fine particles to fill nanopores and voids. In this paper, a state-of-the-art review was carried out on the impact of nano-silica inclusion on the fresh and the mechanical characteristics of geopolymer concrete. So that current and The majority of the most current studies previously published were investigated to draw attention to the influences of nano-silica on the workability, compressive strength, splitting tensile strength, and flexural strength. Based on the analyzed data, the incorporation of nano-silica affected the fresh properties adversely while improves the mechanical performance up to the appropriate dosage of geopolymer concrete.
Keywords:
Nano silica; Geopolymer Concrete; workability; Compressive Strength; Splitting Tensile Strength; Flexural Strength
References
[1] Abdullah, Wrya A., Hemn Unis Ahmed, Younis M. Alshkane, Darko B. Rahman, Ashkan O. Ali, and Shko S. Abubakr. "The Possibility of Using Waste PET Plastic Strip to Enhance the Flexural Capacity of Concrete Beams." Journal of Engineering Research 9 (2021).
https://doi.org/10.36909/jer.v9iICRIE.11649
[2] Yildirim, G., Sahmaran, M., & Ahmed, H. U. (2015). Influence of hydrated lime addition on the self-healing capability of high-volume fly ash incorporated cementitious composites. Journal of Materials in Civil Engineering, 27(6), 04014187.
https://doi.org/10.1061/(ASCE)MT.1943-5533.0001145
[3] Yu, Q. L. "Application of nanomaterials in alkali-activated materials." In Nanotechnology in Eco-efficient Construction, pp. 97-121. Woodhead Publishing, 2019.
https://doi.org/10.1016/B978-0-08-102641-0.00005-0
[4] Provis, John L., Angel Palomo, and Caijun Shi. "Advances in understanding alkali-activated materials." Cement and Concrete Research,vol.78,pp. 110-125, 2015.
https://doi.org/10.1016/j.cemconres.2015.04.013
[5] Abdel-Gawwad, H. A., and S. A. Abo-El-Enein. "A novel method to produce dry geopolymer cement powder." HBRC journal,vol. 12, no. 1,pp. 13-24, (2016).
https://doi.org/10.1016/j.hbrcj.2014.06.008
[6] Sumesh, Mathialagan, U. Johnson Alengaram, Mohd Zamin Jumaat, Kim Hung Mo, and Mohammed Fouad Alnahhal. "Incorporation of nanomaterials in cement composite and geopolymer based paste and mortar-A review." Construction and Building Materials,vol. 148,pp. 62-84,(2017).
https://doi.org/10.1016/j.conbuildmat.2017.04.206
[7] Weil, M., K. Dombrowski, and A. Buchwald. "Life-cycle analysis of geopolymers." In Geopolymers, pp. 194- 210. Woodhead Publishing, 2009.
https://doi.org/10.1533/9781845696382.2.194
[8] Mohammed, Azad A., Hemn Unis Ahmed, and Amir Mosavi. "Survey of Mechanical Properties of Geopolymer Concrete: A Comprehensive Review and Data Analysis." Materials 14, no. 16 (2021): 4690.
https://doi.org/10.3390/ma14164690
[9] Ahmed, Hemn Unis, Ahmed Salih Mohammed, Azad A. Mohammed, and Rabar H. Faraj. "Systematic multiscale models to predict the compressive strength of fly ash-based geopolymer concrete at various mixture proportions and curing regimes." Plos one 16, no. 6 (2021): e0253006.
https://doi.org/10.1371/journal.pone.0253006
[10] Omer, Sharmarke Abdi, Ramazan Demirboga, and Waleed H. Khushefati. "Relationship between compressive strength and UPV of GGBFS based geopolymer mortars exposed to elevated temperatures." Construction and Building Materials,vol. 94,pp. 189-195, (2015).
https://doi.org/10.1016/j.conbuildmat.2015.07.006
[11] Duxson, Peter, Ana Fernández-Jiménez, John L. Provis, Grant C. Lukey, Angel Palomo, and Jannie SJ van Deventer. "Geopolymer technology: the current state of the art." Journal of materials science,vol. 42, no. 9,pp. 2917-2933 (2007).
https://doi.org/10.1007/s10853-006-0637-z
[12] Ravitheja, A., and NLN Kiran Kumar. "Effect of N-Sand GGBS on the Strength Properties of Fly Ash-Based Geopolymers." In Sustainable Construction and Building Materials, pp. 449-458. Springer, Singapore, 2019.
https://doi.org/10.1007/978-981-13-3317-0_40
[13] Lazaro, A., Q. L. Yu, and H. J. H. Brouwers. "Nanotechnologies for sustainable construction." In Sustainability of Construction Materials, pp. 55-78. Woodhead Publishing, 2016.
https://doi.org/10.1016/B978-0-08-100370-1.00004-4
[14] Assaedi, H., F. U. A. Shaikh, and It Meng Low. "Influence of mixing methods of nano silica on the microstructural and mechanical properties of flax fabric reinforced geopolymer composites." Construction and Building Materials,vol. 123,pp.541-552 (2016).
https://doi.org/10.1016/j.conbuildmat.2016.07.049
[15] Faraj, Rabar H., Azad A. Mohammed, Ahmed Mohammed, Khalid M. Omer, and Hemn Unis Ahmed. "Systematic multiscale models to predict the compressive strength of self-compacting concretes modified with nanosilica at different curing ages." Engineering with Computers (2021): 1-24.
https://doi.org/10.1007/s00366-021-01385-9
[16] Roco, Michael C., R. Stanley Williams, and Paul Alivisatos, eds. Nanotechnology research directions: IWGN workshop report: vision for nanotechnology in the next decade. Springer Science & Business Media, 2000.
https://doi.org/10.1007/978-94-015-9576-6
[17] Falikman, Vyacheslav R., and Boris V. Gusev. "Nanotechologies in new structural concretes: Practice and outlook." In Concrete-Innovation and Design: fib Symposium Proceedings, pp. 232-234. 2015.
[18] Çevik, Abdulkadir, Radhwan Alzeebaree, Ghassan Humur, An?l Ni?, and Mehmet Eren Gül?an. "Effect of NSon the chemical durability and mechanical performance of fly ash based GPC." Ceramics International,vol. 44, no. 11,pp. 12253-12264 (2018).
https://doi.org/10.1016/j.ceramint.2018.04.009
[19] Patel, Yagnesh, Indrajit N. Patel, and Mrs Jagruti Shah. "Experimental investigation on compressive strength and durability properties ofGPC incorporating with nano silica." Journal Impact Factor,vol. 6, no. 5,pp. 135-143, (2015).
[20] Adak, Dibyendu, Manas Sarkar, and Saroj Mandal. "Structural performance of N-Smodified fly-ash based GPC." Construction and Building Materials,vol. 135,pp. 430-439, (2016).
https://doi.org/10.1016/j.conbuildmat.2016.12.111
[21] Mustakim, Syed Mohammed, Shaswat Kumar Das, Jyotirmoy Mishra, Asif Aftab, Thamer Salman Alomayri, Hasan Suliman Assaedi, and Cyriaque Rodrigue Kaze. "Improvement in fresh, mechanical and microstructural properties of fly ash-blast furnace slag based GPC by addition of nano and micro silica." Silicon,pp. 1-14 ,(2020).
https://doi.org/10.1007/s12633-020-00593-0
[22] Khater, Hisham Mustafa Mohamed. "Physicomechanical properties of N-Seffect on geopolymer composites." Journal of Building Materials and Structures,vol.3, no.1 ,pp.1-14,(2016).
https://doi.org/10.34118/jbms.v3i1.20
[23] Behfarnia, K., and M. Rostami. "Effects of micro and nanoparticles of SiO2 on the permeability of alkali activated slag concrete." Construction and building materials,vol. 131,pp. 205-213, (2017).
https://doi.org/10.1016/j.conbuildmat.2016.11.070
[24] Nuaklong, Peem, Pitcha Jongvivatsakul, Thanyawat Pothisiri, Vanchai Sata, and Prinya Chindaprasirt. "Influence of rice husk ash on mechanical properties and fire resistance of recycled aggregate high-calcium fly ash GPC." Journal of Cleaner Production,vol. 252,pp. 119797, (2020).
https://doi.org/10.1016/j.jclepro.2019.119797
[25] Ibrahim, Mohammed, Megat Azmi Megat Johari, Mohammed Maslehuddin, and Muhammad Kalimur Rahman. "Influence of nano-SiO2 on the strength and microstructure of natural pozzolan based alkali activated concrete." Construction and Building Materials,vol. 173,pp. 573-585, (2018).
https://doi.org/10.1016/j.conbuildmat.2018.04.051
[26] Nuaklong, Peem, Vanchai Sata, Ampol Wongsa, Korb Srinavin, and Prinya Chindaprasirt. "Recycled aggregate high calcium fly ash GPC with inclusion of OPC and nano-SiO2." Construction and Building Materials,vol. 174,pp. 244-252, (2018).
https://doi.org/10.1016/j.conbuildmat.2018.04.123
[27] Emad, Hala, Waleed Soufi, Ahmed Elmannaey, Magdy Abd-El-Aziz, and Hany EL-Ghazaly. "Effect of N-Son the Mechanical Properties of Slag GPC."2018.
[28] Guo, Xiaolu, Wenpei Hu, and Huisheng Shi. "Microstructure and self-solidification/stabilization (S/S) of heavy metals of nano-modified CFA-MSWIFA composite geopolymers." Construction and building materials,vol. 56,pp. 81-86, (2014).
https://doi.org/10.1016/j.conbuildmat.2014.01.062
[29] Chinthakunta, Raghavender, Durga Prasad Ravella, M. Sri Rama Chand, and M. Janardhan Yadav. "Performance evaluation of self-compacting concrete containing fly ash, silica fume and nano titanium oxide." Materials Today: Proceedings,vol. 43,pp. 2348-2354,(2021).
https://doi.org/10.1016/j.matpr.2021.01.681
[30] Mahboubi, Behnam, Zuhua Guo, and Hao Wu. "Evaluation of durability behavior of GPC containing N-Sand Nano-clay additives in acidic media." Journal of civil Engineering and Materials Application,vol. 3, no. 3,pp. 163-171 (2019).
[31] Rabiaa, E., R. A. S. Mohamed, W. H. Sofi, and Taher A. Tawfik. "Developing GPC Properties by Using Nanomaterials and Steel Fibers." Advances in Materials Science and Engineering,vol. 2020, (2020).
https://doi.org/10.1155/2020/5186091
[32] Abbasi, Saloumeh Mesgari, Hamidreza Ahmadi, Gholamreza Khalaj, and Bahar Ghasemi. "Microstructure and mechanical properties of a metakaolinite-based geopolymer nanocomposite reinforced with carbon nanotubes." Ceramics International, vol. 42, no. 14,pp. 15171-15176, (2016).
https://doi.org/10.1016/j.ceramint.2016.06.080
[33] Zhang, Min-Hong, Jahidul Islam, and Sulapha Peethamparan. "Use of N-Sto increase early strength and reduce setting time of concretes with high volumes of slag." Cement and Concrete Composites,vol. 34, no. 5,pp. 650-662, (2012).
https://doi.org/10.1016/j.cemconcomp.2012.02.005
[34] Aggarwal, Paratibha, Rahul Pratap Singh, and Yogesh Aggarwal. "Use of N-Sin cement based materials-A review." Cogent Engineering,vol. 2, no.1,pp.1078018 (2015).
https://doi.org/10.1080/23311916.2015.1078018
[35] Nazari, Ali, and Shadi Riahi. "The effects of Cr2O3 nanoparticles on strength assessments and water permeability of concrete in different curing media." Materials Science and Engineering: A,vol. 528, no. 3,pp. 1173-1182 (2011).
https://doi.org/10.1016/j.msea.2010.09.099
[36] Parveen, Shazia, Abdul Hamid Wani, Mohammad Ashraf Shah, Henam Sylvia Devi, Mohd Yaqub Bhat, and Jahangir Abdullah Koka. "Preparation, characterization and antifungal activity of iron oxide nanoparticles." Microbial pathogenesis,vol. 115,pp. 287-292, (2018).
https://doi.org/10.1016/j.micpath.2017.12.068
[37] Hussin, M. W., M. A. R. Bhutta, M. Azreen, P. J. Ramadhansyah, and J. Mirza. "Performance of blended ash GPC at elevated temperatures." Materials and Structures,vol. 48, no. 3,pp. 709-720, (2015).
https://doi.org/10.1617/s11527-014-0251-5
[38] Abhilash, P. P., Dheeresh Kumar Nayak, Bhaskar Sangoju, Rajesh Kumar, and Veerendra Kumar. "Effect of nano-silica in concrete; a review." Construction and Building Materials 278 (2021): 122347.
https://doi.org/10.1016/j.conbuildmat.2021.122347
[39] Bahij, Sifatullah, Safiullah Omary, Francoise Feugeas, and Amanullah Faqiri. "Fresh and hardened properties of concrete containing different forms of plastic waste-A review." Waste Management,vol. 113,pp.157-175 ,(2020).
https://doi.org/10.1016/j.wasman.2020.05.048
[40] Alshkane, Younis Mustafa, Serwan Khorsheed Rafiq, and Hemn Unis Boiny. "Correlation between Destructive and Non-Destructive Tests on the Mechanical Properties of Different Cement Mortar Mixtures incorporating Polyethylene Terephthalate Fibers." Sulaimania Journal for Engineering Sciences 4, no. 5 (2017).
[41] Standard Test Method for Slump of Hydraulic-Cement Concrete, ASTM C143-15.
[42] ASTM C1611/C1611M-18."Standard Test Method for Slump Flow of Self-Consolidating Concrete". American Society for Testing and Materials,2018.
[43] The European Standard BS EN 12350-3, testing of fresh concrete: part-3: vebe test, 2009.
[44] The European Standard BS EN 12350-4, Testing of fresh concrete: part-4: degree of compactibility, 2009.
[45] The European Standard BS EN 12350-5: Testing of fresh concrete: part-5: flow table test,2009.
[46] Ahmed, Hemn Unis, Rabar H. Faraj, Nahla Hilal, Azad A. Mohammed, and Aryan Far H. Sherwani. "Use of recycled fibers in concrete composites: A systematic comprehensive review." Composites Part B: Engineering (2021): 108769.
https://doi.org/10.1016/j.compositesb.2021.108769
[47] Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, ASTM C39-17.
[48] Standard, British. "Testing hardened concrete." Compressive Strength of Test Specimens, BS EN,pp. 12390-3 ,(2009).
[49] Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens, ASTM C496- 11.
[50] The European Standard BS EN12390-6, testing on hardned concrete: part-6: tensile splitting strength of test specimens, 2009.
[51] Boiny, Hemn U., Younis M. Alshkane, and Serwan Kh Rafiq. "Mechanical properties of cement mortar by using polyethylene terephthalate fibers." In 5th National and 1st International Conference on Modern Materials and Structures in Civil Engineering, Iran (Islamic Republic of Iran). 2016.
[52] Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading), ASTM C78-16.
[53] Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading), ASTM C293-16
[54] The European Standard BS EN12390-5, testing on hardned concrete: part-5: flexural strength of test specimens,2009.
[55] Naskar, Sudipta, and Arun Kumar Chakraborty. "Effect of nano materials in geopolymer concrete." Perspectives in science 8 (2016): 273-275.
https://doi.org/10.1016/j.pisc.2016.04.049
https://doi.org/10.36909/jer.v9iICRIE.11649
[2] Yildirim, G., Sahmaran, M., & Ahmed, H. U. (2015). Influence of hydrated lime addition on the self-healing capability of high-volume fly ash incorporated cementitious composites. Journal of Materials in Civil Engineering, 27(6), 04014187.
https://doi.org/10.1061/(ASCE)MT.1943-5533.0001145
[3] Yu, Q. L. "Application of nanomaterials in alkali-activated materials." In Nanotechnology in Eco-efficient Construction, pp. 97-121. Woodhead Publishing, 2019.
https://doi.org/10.1016/B978-0-08-102641-0.00005-0
[4] Provis, John L., Angel Palomo, and Caijun Shi. "Advances in understanding alkali-activated materials." Cement and Concrete Research,vol.78,pp. 110-125, 2015.
https://doi.org/10.1016/j.cemconres.2015.04.013
[5] Abdel-Gawwad, H. A., and S. A. Abo-El-Enein. "A novel method to produce dry geopolymer cement powder." HBRC journal,vol. 12, no. 1,pp. 13-24, (2016).
https://doi.org/10.1016/j.hbrcj.2014.06.008
[6] Sumesh, Mathialagan, U. Johnson Alengaram, Mohd Zamin Jumaat, Kim Hung Mo, and Mohammed Fouad Alnahhal. "Incorporation of nanomaterials in cement composite and geopolymer based paste and mortar-A review." Construction and Building Materials,vol. 148,pp. 62-84,(2017).
https://doi.org/10.1016/j.conbuildmat.2017.04.206
[7] Weil, M., K. Dombrowski, and A. Buchwald. "Life-cycle analysis of geopolymers." In Geopolymers, pp. 194- 210. Woodhead Publishing, 2009.
https://doi.org/10.1533/9781845696382.2.194
[8] Mohammed, Azad A., Hemn Unis Ahmed, and Amir Mosavi. "Survey of Mechanical Properties of Geopolymer Concrete: A Comprehensive Review and Data Analysis." Materials 14, no. 16 (2021): 4690.
https://doi.org/10.3390/ma14164690
[9] Ahmed, Hemn Unis, Ahmed Salih Mohammed, Azad A. Mohammed, and Rabar H. Faraj. "Systematic multiscale models to predict the compressive strength of fly ash-based geopolymer concrete at various mixture proportions and curing regimes." Plos one 16, no. 6 (2021): e0253006.
https://doi.org/10.1371/journal.pone.0253006
[10] Omer, Sharmarke Abdi, Ramazan Demirboga, and Waleed H. Khushefati. "Relationship between compressive strength and UPV of GGBFS based geopolymer mortars exposed to elevated temperatures." Construction and Building Materials,vol. 94,pp. 189-195, (2015).
https://doi.org/10.1016/j.conbuildmat.2015.07.006
[11] Duxson, Peter, Ana Fernández-Jiménez, John L. Provis, Grant C. Lukey, Angel Palomo, and Jannie SJ van Deventer. "Geopolymer technology: the current state of the art." Journal of materials science,vol. 42, no. 9,pp. 2917-2933 (2007).
https://doi.org/10.1007/s10853-006-0637-z
[12] Ravitheja, A., and NLN Kiran Kumar. "Effect of N-Sand GGBS on the Strength Properties of Fly Ash-Based Geopolymers." In Sustainable Construction and Building Materials, pp. 449-458. Springer, Singapore, 2019.
https://doi.org/10.1007/978-981-13-3317-0_40
[13] Lazaro, A., Q. L. Yu, and H. J. H. Brouwers. "Nanotechnologies for sustainable construction." In Sustainability of Construction Materials, pp. 55-78. Woodhead Publishing, 2016.
https://doi.org/10.1016/B978-0-08-100370-1.00004-4
[14] Assaedi, H., F. U. A. Shaikh, and It Meng Low. "Influence of mixing methods of nano silica on the microstructural and mechanical properties of flax fabric reinforced geopolymer composites." Construction and Building Materials,vol. 123,pp.541-552 (2016).
https://doi.org/10.1016/j.conbuildmat.2016.07.049
[15] Faraj, Rabar H., Azad A. Mohammed, Ahmed Mohammed, Khalid M. Omer, and Hemn Unis Ahmed. "Systematic multiscale models to predict the compressive strength of self-compacting concretes modified with nanosilica at different curing ages." Engineering with Computers (2021): 1-24.
https://doi.org/10.1007/s00366-021-01385-9
[16] Roco, Michael C., R. Stanley Williams, and Paul Alivisatos, eds. Nanotechnology research directions: IWGN workshop report: vision for nanotechnology in the next decade. Springer Science & Business Media, 2000.
https://doi.org/10.1007/978-94-015-9576-6
[17] Falikman, Vyacheslav R., and Boris V. Gusev. "Nanotechologies in new structural concretes: Practice and outlook." In Concrete-Innovation and Design: fib Symposium Proceedings, pp. 232-234. 2015.
[18] Çevik, Abdulkadir, Radhwan Alzeebaree, Ghassan Humur, An?l Ni?, and Mehmet Eren Gül?an. "Effect of NSon the chemical durability and mechanical performance of fly ash based GPC." Ceramics International,vol. 44, no. 11,pp. 12253-12264 (2018).
https://doi.org/10.1016/j.ceramint.2018.04.009
[19] Patel, Yagnesh, Indrajit N. Patel, and Mrs Jagruti Shah. "Experimental investigation on compressive strength and durability properties ofGPC incorporating with nano silica." Journal Impact Factor,vol. 6, no. 5,pp. 135-143, (2015).
[20] Adak, Dibyendu, Manas Sarkar, and Saroj Mandal. "Structural performance of N-Smodified fly-ash based GPC." Construction and Building Materials,vol. 135,pp. 430-439, (2016).
https://doi.org/10.1016/j.conbuildmat.2016.12.111
[21] Mustakim, Syed Mohammed, Shaswat Kumar Das, Jyotirmoy Mishra, Asif Aftab, Thamer Salman Alomayri, Hasan Suliman Assaedi, and Cyriaque Rodrigue Kaze. "Improvement in fresh, mechanical and microstructural properties of fly ash-blast furnace slag based GPC by addition of nano and micro silica." Silicon,pp. 1-14 ,(2020).
https://doi.org/10.1007/s12633-020-00593-0
[22] Khater, Hisham Mustafa Mohamed. "Physicomechanical properties of N-Seffect on geopolymer composites." Journal of Building Materials and Structures,vol.3, no.1 ,pp.1-14,(2016).
https://doi.org/10.34118/jbms.v3i1.20
[23] Behfarnia, K., and M. Rostami. "Effects of micro and nanoparticles of SiO2 on the permeability of alkali activated slag concrete." Construction and building materials,vol. 131,pp. 205-213, (2017).
https://doi.org/10.1016/j.conbuildmat.2016.11.070
[24] Nuaklong, Peem, Pitcha Jongvivatsakul, Thanyawat Pothisiri, Vanchai Sata, and Prinya Chindaprasirt. "Influence of rice husk ash on mechanical properties and fire resistance of recycled aggregate high-calcium fly ash GPC." Journal of Cleaner Production,vol. 252,pp. 119797, (2020).
https://doi.org/10.1016/j.jclepro.2019.119797
[25] Ibrahim, Mohammed, Megat Azmi Megat Johari, Mohammed Maslehuddin, and Muhammad Kalimur Rahman. "Influence of nano-SiO2 on the strength and microstructure of natural pozzolan based alkali activated concrete." Construction and Building Materials,vol. 173,pp. 573-585, (2018).
https://doi.org/10.1016/j.conbuildmat.2018.04.051
[26] Nuaklong, Peem, Vanchai Sata, Ampol Wongsa, Korb Srinavin, and Prinya Chindaprasirt. "Recycled aggregate high calcium fly ash GPC with inclusion of OPC and nano-SiO2." Construction and Building Materials,vol. 174,pp. 244-252, (2018).
https://doi.org/10.1016/j.conbuildmat.2018.04.123
[27] Emad, Hala, Waleed Soufi, Ahmed Elmannaey, Magdy Abd-El-Aziz, and Hany EL-Ghazaly. "Effect of N-Son the Mechanical Properties of Slag GPC."2018.
[28] Guo, Xiaolu, Wenpei Hu, and Huisheng Shi. "Microstructure and self-solidification/stabilization (S/S) of heavy metals of nano-modified CFA-MSWIFA composite geopolymers." Construction and building materials,vol. 56,pp. 81-86, (2014).
https://doi.org/10.1016/j.conbuildmat.2014.01.062
[29] Chinthakunta, Raghavender, Durga Prasad Ravella, M. Sri Rama Chand, and M. Janardhan Yadav. "Performance evaluation of self-compacting concrete containing fly ash, silica fume and nano titanium oxide." Materials Today: Proceedings,vol. 43,pp. 2348-2354,(2021).
https://doi.org/10.1016/j.matpr.2021.01.681
[30] Mahboubi, Behnam, Zuhua Guo, and Hao Wu. "Evaluation of durability behavior of GPC containing N-Sand Nano-clay additives in acidic media." Journal of civil Engineering and Materials Application,vol. 3, no. 3,pp. 163-171 (2019).
[31] Rabiaa, E., R. A. S. Mohamed, W. H. Sofi, and Taher A. Tawfik. "Developing GPC Properties by Using Nanomaterials and Steel Fibers." Advances in Materials Science and Engineering,vol. 2020, (2020).
https://doi.org/10.1155/2020/5186091
[32] Abbasi, Saloumeh Mesgari, Hamidreza Ahmadi, Gholamreza Khalaj, and Bahar Ghasemi. "Microstructure and mechanical properties of a metakaolinite-based geopolymer nanocomposite reinforced with carbon nanotubes." Ceramics International, vol. 42, no. 14,pp. 15171-15176, (2016).
https://doi.org/10.1016/j.ceramint.2016.06.080
[33] Zhang, Min-Hong, Jahidul Islam, and Sulapha Peethamparan. "Use of N-Sto increase early strength and reduce setting time of concretes with high volumes of slag." Cement and Concrete Composites,vol. 34, no. 5,pp. 650-662, (2012).
https://doi.org/10.1016/j.cemconcomp.2012.02.005
[34] Aggarwal, Paratibha, Rahul Pratap Singh, and Yogesh Aggarwal. "Use of N-Sin cement based materials-A review." Cogent Engineering,vol. 2, no.1,pp.1078018 (2015).
https://doi.org/10.1080/23311916.2015.1078018
[35] Nazari, Ali, and Shadi Riahi. "The effects of Cr2O3 nanoparticles on strength assessments and water permeability of concrete in different curing media." Materials Science and Engineering: A,vol. 528, no. 3,pp. 1173-1182 (2011).
https://doi.org/10.1016/j.msea.2010.09.099
[36] Parveen, Shazia, Abdul Hamid Wani, Mohammad Ashraf Shah, Henam Sylvia Devi, Mohd Yaqub Bhat, and Jahangir Abdullah Koka. "Preparation, characterization and antifungal activity of iron oxide nanoparticles." Microbial pathogenesis,vol. 115,pp. 287-292, (2018).
https://doi.org/10.1016/j.micpath.2017.12.068
[37] Hussin, M. W., M. A. R. Bhutta, M. Azreen, P. J. Ramadhansyah, and J. Mirza. "Performance of blended ash GPC at elevated temperatures." Materials and Structures,vol. 48, no. 3,pp. 709-720, (2015).
https://doi.org/10.1617/s11527-014-0251-5
[38] Abhilash, P. P., Dheeresh Kumar Nayak, Bhaskar Sangoju, Rajesh Kumar, and Veerendra Kumar. "Effect of nano-silica in concrete; a review." Construction and Building Materials 278 (2021): 122347.
https://doi.org/10.1016/j.conbuildmat.2021.122347
[39] Bahij, Sifatullah, Safiullah Omary, Francoise Feugeas, and Amanullah Faqiri. "Fresh and hardened properties of concrete containing different forms of plastic waste-A review." Waste Management,vol. 113,pp.157-175 ,(2020).
https://doi.org/10.1016/j.wasman.2020.05.048
[40] Alshkane, Younis Mustafa, Serwan Khorsheed Rafiq, and Hemn Unis Boiny. "Correlation between Destructive and Non-Destructive Tests on the Mechanical Properties of Different Cement Mortar Mixtures incorporating Polyethylene Terephthalate Fibers." Sulaimania Journal for Engineering Sciences 4, no. 5 (2017).
[41] Standard Test Method for Slump of Hydraulic-Cement Concrete, ASTM C143-15.
[42] ASTM C1611/C1611M-18."Standard Test Method for Slump Flow of Self-Consolidating Concrete". American Society for Testing and Materials,2018.
[43] The European Standard BS EN 12350-3, testing of fresh concrete: part-3: vebe test, 2009.
[44] The European Standard BS EN 12350-4, Testing of fresh concrete: part-4: degree of compactibility, 2009.
[45] The European Standard BS EN 12350-5: Testing of fresh concrete: part-5: flow table test,2009.
[46] Ahmed, Hemn Unis, Rabar H. Faraj, Nahla Hilal, Azad A. Mohammed, and Aryan Far H. Sherwani. "Use of recycled fibers in concrete composites: A systematic comprehensive review." Composites Part B: Engineering (2021): 108769.
https://doi.org/10.1016/j.compositesb.2021.108769
[47] Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, ASTM C39-17.
[48] Standard, British. "Testing hardened concrete." Compressive Strength of Test Specimens, BS EN,pp. 12390-3 ,(2009).
[49] Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens, ASTM C496- 11.
[50] The European Standard BS EN12390-6, testing on hardned concrete: part-6: tensile splitting strength of test specimens, 2009.
[51] Boiny, Hemn U., Younis M. Alshkane, and Serwan Kh Rafiq. "Mechanical properties of cement mortar by using polyethylene terephthalate fibers." In 5th National and 1st International Conference on Modern Materials and Structures in Civil Engineering, Iran (Islamic Republic of Iran). 2016.
[52] Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading), ASTM C78-16.
[53] Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading), ASTM C293-16
[54] The European Standard BS EN12390-5, testing on hardned concrete: part-5: flexural strength of test specimens,2009.
[55] Naskar, Sudipta, and Arun Kumar Chakraborty. "Effect of nano materials in geopolymer concrete." Perspectives in science 8 (2016): 273-275.
https://doi.org/10.1016/j.pisc.2016.04.049
Downloads
How to Cite
[1]
H. H. Sharif, “Fresh and Mechanical Characteristics of Eco-efficient GPC Incorporating Nano-silica: An Overview”, KJAR, vol. 6, no. 2, pp. 64–74, Dec. 2021, doi: 10.24017/science.2021.2.6.
Article Metrics
Published
15-12-2021
Issue
Section
Pure and Applied Science
