Experimental Investigation on The Effect of PolyVinyl Alcohol on Cement Fluid Loss in Oil Wells

https://doi.org/10.24017/science.2020.1.9

Abstract views: 1919 / PDF downloads: 826

Authors

  • Mohammed Jamal Awl Petroleum Engineering Department, Faculty of Engineering | Koya University, Technical College of Engineering | Sulaimani Polytechnic University, Koya, Iraq
  • Atta Sheakh Karim Abdulla City Planning Engineering Department, Technical College of Engineering, Sulaimani Polytechnic University, Sulaimani, Iraq
  • Nabil Adil Tayeb Petroleum and Energy Engineering Department, Technical College of Engineering, Sulaimani Polytechnic University, Sulaimani, Iraq

Abstract

This study presents the effect of PolyVinyl Alcohol Cement Fluid Loss Additive (PVA FLAC) on the API Filtration property of a cement slurry. In Cementing operations of oil wells, different type of fluid loss agents and chemicals are used based on the condition of the wells. PVA FLAC recently introduced in Kurdistan oil industry as loss agent additive to reduce the API Filtration Rate and fluid loss of the cement slurry. Four cementing formulations with different concentration of PVA FLAC additive prepared and their API filtration rates are measured. The results showed that when adding 1.94 gm, 2.91 gm and 3.88 gm of PVA FLAC additive to the cement slurry, the API Filtration Rate reduced by %17, %29 and %42, respectively. The new concentration significantly reduced the rate of filtration when compared to using only 0.97 gm of PVA FLAC additive.

Keywords:

FLAC, PVA, API Filtration Rate, slurry, cement, HPHT Filter Press.

References

[1] A. Atashnezhad, T. Coryell, and G. Hareland, "Barite Nanoparticles Reduce the Cement Fluid Loss," SPE-185114-MS, pp. 27-31, 2017.
https://doi.org/10.2118/185114-MS
[2] W. F. Prassl, "Drilling Engineering Curtin University of technology," 2017.
[3] Institute of Petroleum Engineering, "Drilling Engineering - Heriott Watt University,".
[4] H. Rabia, "Well Engineering & Construction," p. 1 to 789, 2002.
[5] J. P. Pavlich and W. W. Wahl, "Field Results of Cementing Operations Using Slurries Containing a Fluid -Loss Additive for Celnent."SPE133,1962.
https://doi.org/10.2118/133-PA
[6] J. F. Baret, "Why Cement Fluid Loss Additives Are Necessary,"SPE 17630, 1988.
https://doi.org/10.2118/17630-MS
[7] D. T. Mueller and W. S. Bray, "Characterization of Surfactant-Enhanced Cement Fluid-Loss Additives," SPE 25442, 1993. [8] L. F. Mckenzie and P. M. Mcelfresh, "Acrylamide/Acrylic Acid Copolymers for Cement Fluid Loss Control,"SPE 10623, 1982.
https://doi.org/10.2118/25442-MS
[9] B. Dao and P. Vijn, "Environmentally Acceptable Cement Fluid Loss Additive," SPE 74088, 2002.
https://doi.org/10.2118/74088-MS
[10] J. P. Haberman, M. Delestatlus, D. G. Hines, G. Daccord, and J. F. Baret, "Downhole Fluid-Loss Measurements From Drilling Fluid and Cement Slurries," JPT & SPE 1992.
https://doi.org/10.2118/22552-PA
[11] J. Griffith and S. O Osisanya, "Effect of Drilling Fluid Filter Cake Thickness and Permeability on Cement Slurry Fluid Loss," Journal of Canadian Petroleum Technology, 1999.
https://doi.org/10.2118/99-13-15
[12] C. E. Bannister and V. M. Lawson, "Role of Cement Fluid Loss in Wellbore Completion," SPE 14433, 1985.
https://doi.org/10.2118/14433-MS
[13] N. J. Adam, "Drilling Engineering A complete Well Planning Approach," PennWell Publishing Company, Tulsa, Oklahoma, 1985.
[14] J. Plank, F. Dugonji, N. R. Lummer and D. Sadasiwan, "Comparative Study of the Working Mechanisms of Chemically Different Cement Fluid Loss Polymers," SPE 121542, 2009.
https://doi.org/10.2118/121542-MS
[15] M. Ilyas, N. Sadiq, M. A. Mughal, H. Pardawalla, and S. M. Noor, "Improvement of cementing in deep wells," SPE/PAPG Annu. Tech. Conf. 2012, PATC 2012, pp. 155-172, 2012.
https://doi.org/10.2118/163128-MS
[16] API Recommended Practice 10B-2 Second Edition, April, 2013.

Downloads

How to Cite

[1]
M. J. Awl, A. S. K. Abdulla, and N. A. Tayeb, “Experimental Investigation on The Effect of PolyVinyl Alcohol on Cement Fluid Loss in Oil Wells”, KJAR, vol. 5, no. 1, pp. 128–136, Jun. 2020, doi: 10.24017/science.2020.1.9.

Article Metrics

Published

09-06-2020

Issue

Section

Pure and Applied Science